1.Applicable to 400V, 660V systems.
2.Reactance rate options: 1%, 6%, 7%, 12%, 13%, 14%, 14.8%, etc.
3.Rated insulation level: 3kV/min.
4.Temperature rise limits for each part of the reactor:
5.Iron core: ≤ 85K ，Coil: ≤ 95K
6.Noise level: ≤ 50dB.
7.The reactor can operate continuously under power frequency current ≤ 1.35 times the rated current.Reactance linearity: The ratio of reactance at 1.8 times rated current to that at rated current is ≥ 0.95.
8.For three-phase reactors, the difference between any two-phase reactance values shall not exceed ±3%.
9.Insulation thermal class: Class B or higher (130°C).
Normal Operating and Installation Conditions
1. Altitude: ≤ 1000m
2. Ambient temperature: -25℃ ~ +45℃, relative humidity ≤ 90%
3. No harmful gases or flammable materials in the surrounding environment
4. Good ventilation conditions shall be provided in the surrounding environment
Malfunctions & Troubleshooting
Malfunction: Excessive noise and abnormally high temperature rise
Causes: Severe over standard of system harmonic content, incorrect selection of reactance rate, or inherent quality defects of the reactor itself.
Troubleshooting Methods: If the harmonic content is seriously over the standard, filter measures are recommended; select the reactor reactance rate to suppress the lowest-order harmonics of the system, or replace the reactor.
Three-Phase Series Reactor, 6% Reactance Rate
Main Specifications of 6% Reactance Rate (Take CKSG Type for example: 400V System, Three-Phase, Reactance Rate = 6%, Matched Capacitor Voltage: 450V)
Model | Capacitance (kvar) | Reactor Capacity(kvar) | Inductance(mH) | Rated current(A) |
CKSG-0.3/0.45-6% | 5 | 0.3 | 3×7.74 | 6.4 |
CKSG-0.6/0.45-6% | 10 | 0.6 | 3×3.87 | 12.8 |
CKSG-0.9/0.45-6% | 15 | 0.9 | 3×2.58 | 19.2 |
CKSG-1.2/0.45-6% | 20 | 1.2 | 3×1.93 | 25.7 |
CKSG-1.5//0.45-6% | 25 | 1.5 | 3×1.55 | 32.1 |
CKSG-1.8/0.45-6% | 30 | 1.8 | 3×1.29 | 38.5 |
CKSG-2.4/0.45-6% | 40 | 2.4 | 3×0.97 | 51.3 |
CKSG-3.0/0.45-6% | 50 | 3.0 | 3×0.77 | 64.2 |
CKSG-0.36/0.45-6% | 60 | 3.6 | 3×0.64 | 77.0 |
CKSG-4.8/0.45-6% | 80 | 4.8 | 3×0.48 | 102.6 |
Three-Phase Series Reactor, 7% Reactance Rate
Main Specifications of 7% Reactance Rate (Take CKSG Type for example: 400V System, Three-Phase, Reactance Rate = 7%, Matched Capacitor Voltage: 480V
Model | Capacitance (kvar) | Reactor Capacitance (kvar) | Inductance (mH) | Rated curent(A) |
CKSG-0.7/0.48-7% | 10 | 0.7 | 3×3.51 | 12 |
CKSG-1.05/0.48-7% | 15 | 1.06 | 3×3.42 | 18.04 |
CKSG-1.4/0.48-7% | 20 | 1.4 | 3×2.56 | 24 |
CKSG-1.75/0.48-7% | 25 | 1.75 | 3×2.05 | 30 |
CKSG-2.1/0.48-7% | 30 | 2.1 | 3×1.71 | 36 |
CKSG-2.8/0.48-7% | 40 | 2.8 | 3×1.28 | 48.11 |
CKSG-3.15/0.48-7% | 45 | 3.15 | 3×1.14 | 54.12 |
CKSG-3.5/0.48-7% | 50 | 3.5 | 3×1.027 | 60.14 |
English
